[Previous][Next]
CHECK INITIAL LEARNING QUANTITY
cautionAfter replace the front transaxle assembly, perform the "Check Initial Learning Quantity".
1. Check the electric motor switch turned OFF, and connect scan tool (M.U.T.-IIISE).
2. Turn the power supply mode of the electric motor switch to ON, and illuminate the READY (ready to drive) indicator.
3. Operate the selector lever and the electrical parking switch from P to N and vice versa.
4. Check that the following data list display contents by scan tool (M.U.T.-IIISE). (Refer to ).
  1. Item 25: Lock learning count
  2. Item 26: Unlock learning count
5. Calculate an initial learning quantity value with the equation of "b - a".
6. Check the initial learning quantity.
Standard value: 326 to 492
7. If over the standard value, replace the front transaxle assembly.
8. if under the standard value, carry out troubleshooting for diagnostic trouble code P1033. (Refer to GROUP 54Da - Code No.P1033: Electrical parking lock initial learning failure ).