1. Remove the electrical parking relay.
2. Use a jumper wire to connect the positive battery terminal (+) to the electrical parking relay terminal No. 3, and the negative battery terminal (-) to the terminal No. 1.
3. Check for continuity between the electrical parking relay terminals No. 2 and No. 4.| | | Jumper wire | Continuity between terminals No. 2 and No. 4 | | Connect | Yes (2Ω or less) | | Disconnect | No |
|
4. If not as specified, replace the electrical parking relay.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)