1. Remove the drain plug and gasket, to drain the fluid.
2. Install the drain plug and new gasket, and tighten to the specified torque.Tightening torque: 32 ± 2 N·m (24 ± 1 ft-lb)
3. Remove the rear differential support weight B.
4. Remove the filler plug and gasket, and fill the fluid up to the lower edge of the filler plug hole.Brand name:MITSUBISHI MOTORS GENUINE ATF SP III
Quantity: 0.85 dm3 (0.898 qt)
5. Install the filler plug and new gasket, and tighten to the specified torque.Tightening torque: 32 ± 2 N·m (24 ± 1 ft-lb)
6. Install the rear differential support weight B.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
)
)