[Previous][Next]
REMOVAL AND INSTALLATION
 
 
cautionIf the EV oil cooler is removed, install the oil level plug and then add the oil of 0.45 dm3 (0.48 quart).
Pre-removal and Post-installation Operation
  • Oil Draining and Refilling (Refer to .)
  • Headlight Support Upper Panel Cover and Radiator Grille Removal and Installation (Refer to GROUP 51 - Radiator Grille ).
  • Latch Cover and Front Bumper Side Reinforcement A Removal and Installation (Refer to GROUP 42A - Loose Panel ).
  • Hood Latch Removal and Installation (Refer to GROUP 42A - Hood ).
Removal steps
<<A>>>>A<<1.EV oil cooler hose D connection
<<A>>>>A<<2.EV oil cooler hose E connection
3.EV oil cooler lower bracket
4.EV oil cooler upper bracket
5.EV oil cooler
 
 
REMOVAL SERVICE POINT
 
 
<<A>> EV OIL COOLER HOSE REMOVAL
Make mating marks on the hose and the hose clip as shown to install them in the original position.
 

 

 
 
INSTALLATION SERVICE POINT
 
 
>>A<< EV OIL COOLER HOSE CONNECTION
1. Insert the hose until the protrusion of the fitting.
2. Align the mating marks on the hose and hose clip.