13A-EVAPORATIVE EMISSION SYSTEM COMPONENT TEST REFERENCE TABLE

[Previous]

[Next]

EVAPORATIVE EMISSION SYSTEM COMPONENT TEST REFERENCE TABLE

note	*¹: When this item is executed, it becomes the refuel control mode. In order to cancel the refuel control mode, one of the following conditions must be satisfied.

Using scan tool (M.U.T.-IIISE), "Forced Refuel control completion" from Special Function screen is executed.
30 minutes passed after the item execution.
Drive the vehicle continuously for about 30 seconds.

note	*²: Since the operation sound is small, use stethoscope or long blade screwdriver to confirm the operation sound.

M.U.T.-III SCAN TOOL DISPLAY	ITEM NO.	INSPECTION ITEM	DRIVE CONTENTS	INSPECTION REQUIREMENT		NORMAL CONDITION
Bypass valve solenoid ON	1	Bypass valve	Bypass valve turns from OFF to ON.	Power supply mode of the electric motor switch: ON (not READY) It is not in the evaporative emission system monitor test. It is not in the refuel control mode. Listen near the evaporative emission canister for the sound of bypass valve operation.		Clicks when solenoid valve is driven. Data list item 209, Bypass Valve Solenoid is displayed "ON".
Bypass valve solenoid OFF	2	Bypass valve	Bypass valve turns OFF.			Operating sound cannot be heard. Data list item 209, Bypass Valve Solenoid is displayed "OFF".
Evap leak detection pump ON	7	Evaporative emission leak detection pump	Evaporative emission leak detection pump operates.	Power supply mode of the electric motor switch: ON (not READY) It is not in the evaporative emission system monitor test. It is not in the refuel control mode. Listen near the evaporative emission canister for the sound of evaporative emission leak detection pump operation.		Operating sound can be heard. Data list item 206, Evap Leak Detection Pump Control is displayed "ON".
Evap leak detection pump OFF	8	Evaporative emission leak detection pump	Evaporative emission leak detection pump stops.			Operating sound cannot be heard. Data list item 206, Evap Leak Detection Pump Control is displayed "OFF".
Fuel filler door motor relay ON	9	Fuel filler lid opener relay	Fuel filler lid opener relay turns from OFF to ON.	Power supply mode of the electric motor switch: ON (not READY) The fuel filler lid opener relay is not in operation.		Fuel filler lid opens.*¹ Data list item 205, Fuel Filler Door Motor Relay is displayed "ON".
Fuel filler door motor relay OFF	10	Fuel filler lid opener relay	Fuel filler lid opener relay turns OFF.			Operating sound of fuel filler lid opener actuator cannot be heard. Data list item 205, Fuel Filler Door Motor Relay is displayed "OFF".
Sealing valve solenoid ON	5	Fuel tank solenoid valve	Fuel tank solenoid valve turns from OFF to ON.	Power supply mode of the electric motor switch: ON (not READY) It is not in the evaporative emission system monitor test. It is not in the refuel control mode.		Clicks when solenoid valve is driven.*² The fuel tank differential pressure sensor output is coming near the atmospheric pressure. Data list item 207, Sealing Valve Solenoid is displayed "ON".
Sealing valve solenoid OFF	6	Fuel tank solenoid valve	Fuel tank solenoid valve turns OFF.			Operating sound cannot be heard. Data list item 207, Sealing Valve Solenoid is displayed "OFF".
Vent valve solenoid ON	3	Switching valve	Switching valve turns from OFF to ON.	Power supply mode of the electric motor switch: ON (not READY) It is not in the evaporative emission system monitor test. It is not in the refuel control mode. Listen near the evaporative emission canister for the sound of switching valve operation.		Clicks when solenoid valve is driven. Data list item 208, Vent Valve Solenoid is displayed "ON".
Vent valve solenoid OFF	4	Switching valve	Switching valve turns OFF.			Operating sound cannot be heard. Data list item 208, Vent Valve Solenoid is displayed "OFF".