When the battery cable is disconnected and reconnected, throttle actuator control motor valve (Fully closed position) is eliminated, so that the throttle valve opening angle control would not be performed correctly. When the battery cable is disconnected and reconnected, initialize the throttle actuator control motor using the following procedure.1. Operate the electric motor switch without depressing the brake pedal and turn on the power supply mode of the electric motor switch then, turn off the power supply mode of the electric motor switch.
2. For 10 seconds or more, keep the power supply mode of the electric motor switch OFF.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)