DTC P0D69: ELC. compressor voltage sensor

MONITOR EXECUTION

Continuous

MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)

Not applicable

Not applicable

DTC SET CONDITIONS

• The A/C compressor assembly power supply voltage is between 10 and 16 volts.
  
• The A/C compressor voltage is between 205 volts and 415 volts for 2 seconds.
  
• The drive battery temperature minimum value is more than 59°F (15°C).
  
• The intake air temperature is more than 32°F (0°C).
  

The absolute value of the difference between the A/C compressor input voltage value and the driving battery voltage value remains 20 volts or more for two seconds.

OBD-II DRIVE CYCLE PATTERN

Refer to Diagnostic Function - OBD-II Drive Cycle - Pattern 3 .

PROBABLE CAUSES

• Malfunction of the CAN bus
  
• Malfunction of the A/C compressor assembly
  
• Malfunction of the PHEV-ECU.
  

Scan tool (M.U.T.-IIISE) other system DTC (A/C compressor assembly) (Refer to ).

	Troubleshoot for the relevant DTC. Then go to Step 3.

	Go to Step 2.

(1)Carry out a test drive with the drive cycle pattern. Refer to Diagnostic Function - OBD-II Drive Cycle - Pattern 3 .

	Replace the PHEV-ECU (Refer to GROUP 54Da - PHEV-ECU ). Then go to Step 3.

	The procedure is complete.

(1)Carry out a test drive with the drive cycle pattern. Refer to Diagnostic Function - OBD-II Drive Cycle - Pattern 3 .

	Retry the troubleshooting.

	The procedure is complete.