![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
| caution | During troubleshooting, a DTC associated with other systems may be set when the ignition switch is turned "ON" with connector(s) disconnected. On the completion of troubleshooting, confirm all systems for DTC(s). If DTC(s) are set, erase them all. |
| DTC No. | Diagnostic item | Reference page | |
| B1083 | EEPROM fail |  | |
| U0141 | ETACS CAN timeout | | |
| U1073 | Bus-off (CAN-C (Main)) | | |
| U1190 | Not receive fault detect signal | | |