![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
| caution | During troubleshooting, a DTC associated with other system may be stored when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for DTC(s). If DTC(s) are stored, erase them all. |
| Trouble symptom | Inspection procedure No. | Reference page |
| The ignition key cylinder illumination light does not illuminate/extinguish normally. | 1 |  |
| Malfunction of the ignition switch power supply system. | 2 | |
| Even when the selector lever is in the P position, the ignition switch cannot be turned to the LOCK (OFF) position. / When the selector lever is in other than the P position, the ignition switch can be turned to the LOCK (OFF) position. | 3 | |