23A-SELECTOR LEVER ASSEMBLY CONTINUITY CHECK

SELECTOR LEVER ASSEMBLY CONTINUITY CHECK

SWITCH CHECK

Item	Selector lever position	Terminal number	Continuity
P position detect switch <Vehicles with KOS>	P	4 - 6	No continuity
P position detect switch <Vehicles with KOS>	Other than above	4 - 6	Continuity
P position detect switch <Vehicles without KOS>	P	5 - 6	No continuity
P position detect switch <Vehicles without KOS>	Other than above	5 - 6	Continuity
Ds position switch <Vehicles without paddle shift>	Ds, L	8 - 9	Continuity
Ds position switch <Vehicles without paddle shift>	Other than above	8 - 9	No continuity

Item	Selector lever position	Terminal number	Continuity
P position detect switch <Vehicles with KOS>	P	4 - 6	No continuity
P position detect switch <Vehicles with KOS>	Other than above	4 - 6	Continuity
P position detect switch <Vehicles without KOS>	P	5 - 6	No continuity
P position detect switch <Vehicles without KOS>	Other than above	5 - 6	Continuity
Ds position switch <Vehicles without paddle shift>	Ds, L	8 - 9	Continuity
Ds position switch <Vehicles without paddle shift>	Other than above	8 - 9	No continuity

KEY LOCK RELAY CHECK <VEHICLES WITHOUT KOS>

1. Shift the selector lever to P position.

2. Use a jumper wire to connect terminal No. 5 of the selector lever assembly connector to the battery (+) terminal, terminal No. 6 to the battery (-) terminal. Then apply battery voltage.

3. Check for continuity between the selector lever assembly connector terminals No. 4 and No. 5.

Jumper wire	Continuity between terminals No. 4 and No. 5
Connect	Yes (2 Ω or less)
Disconnect	No

Jumper wire	Continuity between terminals No. 4 and No. 5
Connect	Yes (2 Ω or less)
Disconnect	No