[Previous][Next]
ACTUATOR TEST TABLE
 
 
Item No.Check itemDriven content
1A/C switch*A/C switch selection position
2Rear defogger switch*Rear window defogger switch selection position
4Driver's side air mixing damperThe air mixing damper motor <Single-zone AUTO A/C> or the air mixing damper position (driver's side) <Dual-zone AUTO A/C> moves to the selected position
5Driver's side air mixing damper position resetThe position of the air mixing damper motor <Single-zone AUTO A/C> or the air mixing damper position (driver's side) <Dual-zone AUTO A/C> is reset.
6Passenger's side air mixing damperThe air mixing damper motor (Passenger's side) moves to the selected position <Dual-zone AUTO A/C>.
7Passenger's side air mixing damper position resetThe position of the air mixing damper motor (Passenger's side) is reset <Dual-zone AUTO A/C>.
8Mode selection damperAir outlet changeover damper motor moving position
9Mode selection damper position resetThe position of the air outlet changeover damper motor is reset.
10Out/Inside air selection damperThe moving position of outside/inside air selection damper motor
11Out/Inside air selection damper position resetThe position of the outside/inside air selection damper motor is reset.
12Blower motorThe amount of blower motor rotation
15Condenser fan*The amount of condenser fan rotation
16Idle up request*Idle-up request signal
18A/T lock up open requestSelected request signal not to lock up the CVT is sent
note
  • *: When the engine is not running these function do not work.
  • Other items than listed above are also displayed. However, ignore them.