[Previous][Next]
DTC U1195: Coding not completed
 
 
cautionIf DTC U1195 is set, be sure to diagnose the CAN bus line.
 
 
TROUBLE JUDGMENT
If the vehicle information data is not registered to the camera-ECU, the camera-ECU sets DTC U1195.
note"!" mark is displayed on the vehicle icon when DTC U1195 is set.
 
 
PROBABLE CAUSES
  • Variant coding not performed
  • Malfunction of ETACS-ECU
  • The camera-ECU may be defective
  • The CAN bus may be defective
 
 
DIAGNOSIS
1. Using scan tool (M.U.T.-IIISE), diagnose CAN bus line.
2. Using scan tool (M.U.T.-IIISE), check whether the ETACS DTC is set.
3. Using scan tool (M.U.T.-IIISE), check whether the DTC is set again.