54A-DIAGNOSIS FUNCTION

DIAGNOSTIC FUNCTION

HOW TO CONNECT THE SCAN TOOL (M.U.T.-IIISE)

Required Special Tools:

MB992744: Vehicle communication interface-Lite (V.C.I.-Lite)
MB992745: V.C.I.-Lite main harness A
MB992747: V.C.I.-Lite USB cable short
MB992748: V.C.I.-Lite USB cable long

caution

To prevent damage to scan tool (M.U.T.-IIISE), always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool (M.U.T.-IIISE).

1. Ensure that the ignition switch is at the "LOCK" (OFF) position.

2. Start up the personal computer.

3. Connect special tool MB992747/M992748 to special tool MB992744 and the personal computer.

4. Connect special tool MB992745 to special tool MB992744.

5. Connect special tool MB992745 or special tool MB991910 to the data link connector.

note	When the special tool MB992745 is connected to the data link connector, the special tool MB992744 indicator light will be illuminated in a green color.

6. Start the scan tool (M.U.T.-IIISE) system on the personal computer.

note	Disconnecting scan tool (M.U.T.-IIISE) is the reverse of the connecting sequence, making sure that the ignition switch is at the "LOCK" (OFF) position.

HOW TO READ AND ERASE DIAGNOSTIC TROUBLE CODES

Required Special Tools:

MB992744: Vehicle communication interface-Lite (V.C.I.-Lite)
MB992745: V.C.I.-Lite main harness A
MB992747: V.C.I.-Lite USB cable short
MB992748: V.C.I.-Lite USB cable long

note	If the battery voltage is low, DTCs will not be set. Check the battery if scan tool (M.U.T.-IIISE) does not display.

1. Connect scan tool (M.U.T.-IIISE) to the data link connector.

2. Turn the ignition switch to the "ON" position.

3. Select "STV".

4. Select an appropriate item from "System List," and press the "OK" button.

5. Select "Diagnostic Trouble Code" to read the DTC.

6. If a DTC is set, it is shown.

7. Choose "Erase DTCs" to erase the DTC.

HOW TO DIAGNOSE THE CAN BUS LINES

Required Special Tools:

MB992744: Vehicle communication interface-Lite (V.C.I.-Lite)
MB992745: V.C.I.-Lite main harness A
MB992747: V.C.I.-Lite USB cable short
MB992748: V.C.I.-Lite USB cable long

1. Connect scan tool (M.U.T.-IIISE) to the data link connector.

2. Turn the ignition switch to the "ON" position.

3. Select "CAN bus diagnosis" from the start-up screen.

4. When the optional equipment screen is displayed, choose the one which the vehicle is fitted with, and then select the "OK" button.