[Previous][Next]
CHECK CHART FOR DIAGNOSTIC TROUBLE CODES <Occupant classification-ECU>
 
 
cautionDuring diagnosis, a DTC associated with another system may be set when the ignition switch is turned "ON" position with connector(s) disconnected. After completing the repair, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
Inspect according to the inspection chart that is appropriate for the DTC.
DTCInspection itemReference page
B1690Electromagnetic Interference
B1691Occupant Sensing Antenna
B1693Occupant Sensing Antenna Open
B1694Occupant Sensing ANT.SHT to GND
B1695Occupant Sensing ANT.SHT to BAT
B1CB2Occupant Classification-ECU Parameter Table Incompatible
B210DBattery Voltage Low
B210EBattery Voltage High
B2212OCM Internal Error
U1109ETACS CAN Timeout
U1190No Receive Fault Detect Signal
U15A2Vehicle speed Information Lost
U15A3Odometer Information Lost
U15A4VIN Information Lost