[Previous][Next]
DISASSEMBLY AND ASSEMBLY
 
 
<DRIVER'S SEAT (MANUAL SEAT)>
Disassembly steps
1.Front seat reclining adjuster lever
2.Front seat height adjuster lever cap
3.Front seat height adjuster lever
4.Front seat side shield cover
5.Front seat belt inner
6.Front seat hinge cover
7.Front seat cushion assembly
8.Front seat cover ring
9.Front seat cushion cover
10.Front seat cushion pad
>>A<<11.Front seat nut
>>A<<12.Front seat side-airbag module
<<A>>13.Front seat headrestraint guide
14.Front seat back assembly
15.Front seat cover ring
16.Front seat back cover
17.Front seat back pad
18.Front seat back silencer <Some models>
19.Front seat side shield cover inner
20.Front seat slide rail cover
21.Front seat hook
22.Front seat slide sensor cover
23.Front seat slide sensor
>>A<<24.Front seat frame
 
 
<DRIVER'S SEAT (POWER SEAT)>
Disassembly steps
1.Front seat reclining adjuster knob
2.Front seat slide adjuster knob
3.Front power seat motor cover
4.Front seat side shield cover
5.Front power seat switch
6.Front seat belt inner
7.Front seat hinge cover
8.Front seat cushion assembly
9.Front seat cover ring
10.Front seat cushion cover
11.Front seat cushion pad
>>A<<12.Front seat nut
>>A<<13.Front seat side-airbag module
<<A>>14.Front seat headrestraint guide
15.Front seat back assembly
16.Front seat cover ring
17.Front seat back cover
18.Front seat back pad
19.Front seat back silencer <Some models>
20.Front seat side shield cover inner
21.Front seat slide rail cover
22.Front seat hook
23.Front power seat wiring harness
24.Front seat slide sensor cover
25.Front seat slide sensor
>>A<<26.Front seat frame
 
 
<PASSENGER'S SEAT (MANUAL SEAT)>
caution
  • Always replace the front seat cushion assembly together with the occupant classification-ECU.
  • When replacing the front seat cushion assembly, be careful not to apply static electricity to it.
  • The front seat cushion assembly must not be damped with any liquid or steam.
Disassembly steps
1.Front seat reclining adjuster lever
2.Front seat side shield cover
3.Front seat belt inner
4.Front seat hinge cover
5.Front seat control unit wiring harness
6.Front seat cushion assembly (Including occupant classification-ECU)
>>A<<7.Front seat nut
>>A<<8.Front seat side-airbag module
<<A>>9.Front seat headrestraint guide
10.Front seat back assembly
11.Front seat cover ring
12.Front seat back cover
13.Front seat back pad
14.Front seat back silencer <Some models>
15.Front seat side shield cover inner
16.Front seat hook
>>A<<17.Front seat frame
 
 
<PASSENGER'S SEAT (POWER SEAT)> <From 22 Model year>
Disassembly steps
1.Front seat reclining adjuster knob
2.Front seat slide adjuster knob
3.Front power seat motor cover
4.Front seat side shield cover
5.Front power seat switch
6.Front seat belt inner
7.Front seat hinge cover
8.Front seat control unit wiring harness
9.Front seat cushion assembly (Including occupant classification-ECU)
>>A<<10.Front seat nut
>>A<<11.Front seat side-airbag module
<<A>>12.Front seat headrestraint guide
13.Front seat back assembly
14.Front seat cover ring
15.Front seat back cover
16.Front seat back pad
17.Front seat side shield cover inner
18.Front seat hook
19.Front power seat wiring harness
>>A<<20.Front seat frame
 
 
DISASSEMBLY SERVICE POINT
 
 
<<A>> FRONT SEAT HEADRESTRAINT GUIDE REMOVAL
Remove the headrestraint guides while pushing the on both sides inward.
 
 
 
 
ASSEMBLY SERVICE POINT
 
 
>>A<< FRONT SEAT SIDE-AIRBAG MODULE /FRONT SEAT NUT /FRONT SEAT FRAME INSTALLATION
Replace the front seat nut and the front seat frame with new ones.
noteDo not reuse the front seat frame and the front seat nut because the fastening force may be reduced.
1. Temporarily tighten front seat nuts.
2. First tighten the lower front seat nut to the specified torque, and then tighten the upper front seat nut to the specified torque.
Tightening torque: 6.0 ± 2.0 N·m (53 ± 17 in-lb)