[Previous][Next]
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
Liftgate Trim Upper Removal and Installation (Refer to GROUP 52A, Liftgate Trim ).
 
 
<Up to 20 Model year>
Removal steps
1.Plug
2.Liftgate spoiler
3.Grommet
 
 
<From 22 Model year>
Removal steps
1.Plug
<<A>>2.Liftgate spoiler
3.Liftgate spoiler protector
 
 
    Required special tool:
  • MB990784: Ornament remover
 
 
 
REMOVAL SERVICE POINT <From 22 Model year>
 
 
<<A>> LIFTGATE SPOILER REMOVAL
1. Remove all the mounting bolts.
2. Push up the fin, and remove the clip on the outside of the liftgate spoiler by using the special tool ornament remover (MB990784).
3.
cautionIn order to avoid damage to the liftgate spoiler, be careful not to insert the special tool ornament remover (MB990784) between the inner section and the outer section of the liftgate spoiler.
Insert the special tool ornament remover (MB990784) between the liftgate spoiler and the liftgate panel of the clip mounting section, and disengage the clip.