[Previous][Next]
DTC B1161 VIN mismatch
 
 
caution
  • When DTC B1161 is set, be sure to diagnose the CAN bus line.
  • When replacing the ECU, always check that the communication circuit is normal.
 
 
DIAGNOSTIC FUNCTION
When the VIN registered in KOS&OSS-ECU is different from the VIN transmitted by ECM on the CAN bus line, KOS&OSS-ECU sets DTC B1161.
 
 
JUDGMENT CRITERIA
Check Conditions
  • When all the following conditions are met.
    1. Power supply mode: ON
    2. VIN written in KOS&OSS-ECU
Judgment Criterion
  • The VIN received via CAN communication is different from the VIN written in KOS&OSS-ECU.
 
 
PROBABLE CAUSES
  • Malfunction of the CAN bus line
  • Writing error of VIN to ECM (ECM has been interchanged between two vehicles, or VIN has not been written after ECM replacement)
  • Malfunction of KOS&OSS-ECU
 
 
DIAGNOSIS
1. Using scan tool (M.U.T.-IIISE), diagnose the CAN bus line
2. Check of VIN in ECM
3. KOS&OSS-ECU DTC recheck