[Previous][Next]
TERMINAL VOLTAGE REFERENCE CHART
 
 
Terminal numberTerminal codeCheck itemCheck conditionNormal condition
1ANTGEngine switch immobilizer antenna output (-)When communicating with the keyless operation key (discharged battery) in the engine switch0 to 5 V (pulse signal)
2LEDGEngine switch LED (green) ON signalPower supply mode: ONBattery positive voltage
3LEDWEngine switch LED (character illumination) ON signalAlwaysBattery positive voltage
4EDRPKeyless operation antenna (front: outer side LH) power supply
  • At the door switch operation
  • At the engine switch operation
  • At door open/close
0 to 8 V (pulse signal)
5INFPKeyless operation antenna (front: inner side) power supply
  • At the door switch operation
  • At the engine switch operation
  • At door open/close
0 to 8 V (pulse signal)
6EASPKeyless operation antenna (front: outer side RH) power supply
  • At the door switch operation
  • At the engine switch operation
  • At door open/close
0 to 8 V (pulse signal)
7INRPKeyless operation antenna (rear: inner side) power supply
  • At the door switch operation
  • At the engine switch operation
  • At door open/close
0 to 8 V (pulse signal)
8EGTPKeyless operation antenna (rear: outer side) power supply
  • At the door switch operation
  • At the engine switch operation
  • At door open/close
0 to 8 V (pulse signal)
9ANTPEngine switch immobilizer antenna output (+)When communicating with the keyless operation key (discharged battery) in the engine switch0 to 5 V (pulse signal)
10LEDAEngine switch LED (amber) ON signalPower supply mode: ACCBattery positive voltage
11PGNDGround (for CPU)Always1 V or less
12EDRGKeyless operation antenna (front: outer side LH) groundAlways1 V or less
13INFGKeyless operation antenna (front: inner side) groundAlways1 V or less
14EASGKeyless operation antenna (front: outer side RH) ground Always1 V or less
15INRGKeyless operation antenna (rear: inner side) groundAlways1 V or less
16EGTGKeyless operation antenna (rear: outer side) groundAlways1 V or less
 
 
Terminal numberTerminal codeCheck itemCheck conditionNormal condition
21+BBattery power supplyAlwaysBattery positive voltage
22----
23SGNDGround (for signal)Always1 V or less
24----
25STOStarter output signalCrankingBattery positive voltage
Other than above1 V or less
26 - 28----
29DRVBOutput to keyless operation tone alarm (+)Tone alarm is sounding10 to 12 V (pulse signal)
30DRRQLock/unlock switch (driver's side) outputLock/unlock switch (driver's side): ON1 V or less
31----
32STP1Stop light switch ON/OFF detection signalWhen the brake pedal is depressedBattery positive voltage
When the brake pedal is released1 V or less (pulse signal)
33GTOPLiftgate lock release handle outputOpen switch of liftgate lock release handle: ON1 V or less
34----
35CANHCAN H--
36----
37IODPower supplyWhile the power supply fuse (IOD fuse) is removed, when the engine switch is pressed from the engine switch power supply mode OFFBattery positive voltage
38 - 41----
42ACCACC output signalPower supply mode: ACCBattery positive voltage
Power supply mode: Other than ACC1 V or less
43----
44IG1IG1 output signalPower supply mode: ONBattery positive voltage
Power supply mode: Other than ON1 V or less
45SW1Engine switch ON/OFF detection signalWhen the engine switch is pressedBattery positive voltage
When the engine switch is not pressed1 V or less
46PDSWP position detection signalSelector lever: P position0 to 5 V (pulse signal)
Selector lever: Other than P position1 V or less
47ASRQLock/unlock switch (passenger's side) outputLock/unlock switch (passenger's side): ON1 V or less
48GTRQLiftgate lock release handle outputLock switch of liftgate lock release handle: ON1 V or less
49SW2Engine switch ON/OFF detection signalWhen the engine switch is pressed1 V or less
When the engine switch is not pressed0 to 5 V (pulse signal)
50----
51CANLCAN L--
52----