[Previous][Next]
REMOVAL AND INSTALLATION
 
 
cautionDo not reuse the electric parking brake ECU when you detach the electric parking brake ECU bracket from the electric parking brake ECU. (The bracket cannot hold the ECU any more due to the detachment.)
Pre-removal and Post-installation Operation
  • Shift Lever Panel Assembly Removal and Installation (GROUP 52A - Shift Lever Panel ).
Removal steps
1.Electric parking brake ECU connector connection
2.Electric parking brake ECU and electric parking brake ECU bracket
<<A>>3.Electric parking brake ECU
>>A<<4.Electric parking brake ECU bracket
 
 
REMOVAL SERVICE POINT
 
 
<<A>> ELECTRIC PARKING BRAKE ECU REMOVAL
1.
cautionDo not reuse the electric parking brake ECU when you detach the electric parking brake ECU bracket from the electric parking brake ECU. (The bracket cannot hold the ECU any more due to the detachment.)
 
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< ELECTRIC PARKING BRAKE ECU BRACKET INSTALLATION
1. The laser-etched side of the electric parking brake ECU should face up. Then attach the ECU to the bracket.
2. Check that the projection of the electric parking brake ECU is fitted into the hole of the electric parking brake ECU bracket.