[Previous][Next]
PARKING BRAKE SWITCH CHECK <LEVER TYPE PARKING BRAKE>
 
 
cautionDo not apply grease or lubricant to the switch and the switch installation section to avoid malfunction of the switch. In addition, do not use gloves which have grease on them.
1. Remove the shift lever panel assembly (Refer to GROUP 52A - Front Floor Console Assembly ).
2. Check the continuity between the parking brake switch terminal and the switch mounting bolt.
 
Check conditionNormal condition
When parking brake lever is pulled.Continuity exists
(2 ohms or less)
When parking brake lever is released.No continuity