[Previous][Next]
REMOVAL AND INSTALLATION
 
 
cautionDo not apply grease or lubricant to the switch and the switch installation section to avoid malfunction of the switch. In addition, do not use gloves which have grease on them.
Pre-removal operation
Floor Console Center Removal (Refer to GROUP 52A - Floor Console Assembly ).
Post-installation operation
  • Parking Brake Lever Stroke Check (Refer to ).
  • Floor Console Center Installation (Refer to GROUP 52A - Floor Console Assembly ).
Removal steps
•Release the parking brake lever.
•Loosen the adjusting nut.
1.Parking brake switch connector connection
>>A<<2.Parking brake rear cable assembly connection
3.Parking brake lever assembly
4.Parking brake switch
5.Adjusting nut
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< PARKING BRAKE REAR CABLE INSTALLATION
cautionCheck that the equalizer and the parking brake rear cable are connected correctly. If the parking brake is applied with the equalizer and the parking brake rear cable connected improperly, the equalizer may be damaged.
Connect the parking brake rear cable to the equalizer as shown in the figure.