[Previous][Next]
DISASSEMBLY AND REASSEMBLY <VEHICLES WITHOUT ELECTRIC PARKING BRAKE>
 
 
Disassembly steps
1.Brake pad, shim and wear indicator assembly
2.Brake pad and shim assembly
3.Clip
4.Bolt
5.Caliper support
6.Lock pin
7.Bushing
8.Guide pin
9.Pin boot
<<A>>>>A<<10.Piston
11.Piston boot
12.Piston seal
13.Spring
14.Bleeder cap
15.Bleed screw
16.Caliper body
Required Special Tool:
 
 
LUBRICATION POINTS
 
 
DISASSEMBLY SERVICE POINT
 
 
<<A>> PISTON REMOVAL
Use the special tool, rear disc brake piston driver (MB991621) to turn the piston as shown, and remove it from the caliper body.
 
 
 
 
REASSEMBLY SERVICE POINT
 
 
>>A<< PISTON INSTALLATION
Use the special tool, rear disc brake piston driver (MB991621) as shown to turn the piston and install to the caliper body.