23A-SELECTOR LEVER ASSEMBLY CONTINUITY CHECK

SELECTOR LEVER ASSEMBLY CONTINUITY CHECK

SWITCH CHECK

Item	Selector lever position	Terminal number	Continuity
P position detect switch <Vehicles with KOS>	P	3 - 6	No continuity
P position detect switch <Vehicles with KOS>	Other than above	3 - 6	Continuity
P position detect switch <Vehicles without KOS>	P	6 - 12	No continuity
P position detect switch <Vehicles without KOS>	Other than above	6 - 12	Continuity
Select switch	Sport mode	6 - 11	Continuity
Select switch	Other than above	6 - 11	No continuity
Shift switch (UP)	Upshift and hold	6 - 13	Continuity
Shift switch (UP)	Other than above	6 - 13	No continuity
Shift switch (DOWN)	Downshift and hold	6 - 14	Continuity
Shift switch (DOWN)	Other than above	6 - 14	No continuity

KEY LOCK RELAY CHECK <VEHICLES WITHOUT KOS>

1. Use a jumper wire to connect terminal No. 12 of the selector lever assembly connector to the battery (+) terminal, terminal No. 6 to the battery (-) terminal. Then apply battery voltage.

2. Check for continuity between the selector lever assembly connector terminals No. 3 and No. 12.

Selector lever position	Continuity between terminals No. 3 and No. 12
P	No continuity
Other than above	Continuity