[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Pre-removal Operation
  • Engine Room Under Cover Front A, B and Engine Room Side Cover (RH) Removal (Refer to GROUP 51- Under Cover ).
  • Generator and Others Belt Removal (Refer to GROUP 11A - Crankshaft Pulley ).
Post-installation Operation
  • Generator and Others Belt Installation (Refer to GROUP 11A - Crankshaft Pulley ).
  • Generator and Others Belt Tension Check (Refer to GROUP 11A - On-vehicle Service, Generator and Others Belt Tension Check ).
  • Engine Room Under Cover Front A, B and Engine Room Side Cover (RH) Installation (Refer to GROUP 51 - Under Cover ).
Removal steps
1.Generator connector
2.Generator terminal
3.Generator bracket
4.Generator assembly