[Previous][Next]
HUD SWITCH CHECK
 
 
Remove the HUD switch (Refer to ).
 
Switch resistance check
Switch positionTerminal numberNormal condition
OFF2 - 11
3 - 11
7 - 11
8 - 11
9 - 11
No continuity
ONCombiner open/close switch1 - 2Continuity exists (2 Ω or less)
Angle adjustment switch (DOWN)7 - 11
Angle adjustment switch (UP)2 - 11
Brightness adjustment switch (-)9 - 11
Brightness adjustment switch (+)3 - 11
Switch resistance check
Switch positionTerminal numberNormal condition
OFF2 - 11
3 - 11
7 - 11
8 - 11
9 - 11
No continuity
ONCombiner open/close switch1 - 2Continuity exists (2 Ω or less)
Angle adjustment switch (DOWN)7 - 11
Angle adjustment switch (UP)2 - 11
Brightness adjustment switch (-)9 - 11
Brightness adjustment switch (+)3 - 11
 
Illumination check
Battery voltageTerminal numberNormal condition
Not applied1 (+) - 5 (-)Not illuminated
AppliedIlluminated
Illumination check
Battery voltageTerminal numberNormal condition
Not applied1 (+) - 5 (-)Not illuminated
AppliedIlluminated