[Previous][Next]
IGNITION SWITCH CHECK
With the ignition switch mounted to the vehicle, disconnect the ignition switch connection connector, and then perform the continuity check in each ignition key position.
 
Ignition key positionTerminal numberNormal condition
LOCK1 - 2, 1 - 4, 1 - 5, 1 - 6No continuity
ACC1 - 6Continuity exists (2 ohms or less)
ON1 - 2 - 4 - 6Continuity exists (2 ohms or less)
START1 - 2 - 5Continuity exists (2 ohms or less)
Ignition key positionTerminal numberNormal condition
LOCK1 - 2, 1 - 4, 1 - 5, 1 - 6No continuity
ACC1 - 6Continuity exists (2 ohms or less)
ON1 - 2 - 4 - 6Continuity exists (2 ohms or less)
START1 - 2 - 5Continuity exists (2 ohms or less)