DTC B2548: Calibration not completed
TROUBLE JUDGMENT
When the camera-ECU has not been calibrated, DTC B2548 will be set.
note | - "!" mark is displayed against the camera, which has not been calibrated yet, when DTC B2548 is set.
- DTC B2548 will be erased automatically after learned values are written to the camera-ECU successfully or a relevant camera has been calibrated.
|
TROUBLESHOOTING HINTS
- The camera-ECU not calibrated
- The camera-ECU may be defective
DIAGNOSIS
Using scan tool (M.U.T.-IIISE), check whether the DTC is set again.