DTC U1195: Coding not completed
caution
If DTC U1195 is set, be sure to diagnose the CAN bus line.
TROUBLE JUDGMENT
If the vehicle information data is not registered to the camera-ECU, the camera-ECU sets DTC U1195.
note
"!" mark is displayed on the vehicle icon when DTC U1195 is set.
PROBABLE CAUSES
Variant coding not performed
Malfunction of ETACS-ECU
The camera-ECU may be defective
The CAN bus may be defective
DIAGNOSIS
1.
Using scan tool (M.U.T.-IIISE), diagnose CAN bus line.
2.
Using scan tool (M.U.T.-IIISE), check whether the ETACS DTC is set.
3.
Using scan tool (M.U.T.-IIISE), check whether the DTC is set again.