[Previous][Next]
DISASSEMBLY AND ASSEMBLY
 
 
<DRIVER’S SEAT (MANUAL SEAT)>
Disassembly steps
1.Front seat reclining adjuster lever
2.Front seat height adjuster lever cap
3.Front seat height adjuster lever
4.Front seat side shield cover
5.Front seat belt inner
6.Front seat hinge cover
7.Front seat cushion assembly
8.Front seat cover ring
9.Front seat cushion cover
10.Front seat cushion pad
>>A<<11. Front seat side-airbag module
<<A>>12.Front seat headrest guide
13.Front seat back assembly
14.Front seat cover ring
15.Front seat back cover
16.Front seat back pad
17.Front seat back silencer
18.Front seat side shield cover inner
19.Front seat slide rail cover
20.Front seat hook
21. Front seat slide sensor cover
22. Front seat slide sensor
23. Front seat frame
 
 
<DRIVER’S SEAT (POWER SEAT)>
Disassembly steps
1.Front seat reclining adjuster knob
2.Front seat slide adjuster knob
3.Front power seat motor cover
4.Front seat side shield cover
5.Front power seat switch
6.Front seat belt inner
7.Front seat hinge cover
8.Front seat cushion assembly
9.Front seat cover ring
10.Front seat cushion cover
11.Front seat cushion pad
>>A<<12. Front seat side-airbag module
<<A>>13.Front seat headrest guide
14.Front seat back assembly
15.Front seat cover ring
16.Front seat back cover
17.Front seat back pad
18.Front seat back silencer
19.Front seat side shield cover inner
20.Front seat slide rail cover
21.Front seat hook
22.Front power seat wiring harness
23. Front seat slide sensor cover
24. Front seat slide sensor
25. Front seat frame
 
 
<PASSENGER’S SEAT>
caution
  • Always replace the front seat cushion assembly together with the occupant classification-ECU.
  • When replacing the front seat cushion assembly, be careful not to apply static electricity to it.
  • The front seat cushion assembly must not be damped with any liquid or steam.
Disassembly steps
1.Front seat reclining adjuster lever
2.Front seat side shield cover
3.Front seat belt inner
4.Front seat hinge cover
5.Front seat control unit wiring harness
6.Front seat cushion assembly
>>A<<7.Front seat side-airbag module
<<A>>8.Front seat headrest guide
9.Front seat back assembly
10.Front seat cover ring
11.Front seat back cover
12. Front seat back pad
13.Front seat back silencer
14.Front seat side shield cover inner
15.Front seat hook
16.Front seat frame
 
 
DISASSEMBLY SERVICE POINT
 
 
<<A>> FRONT SEAT HEADREST GUIDE REMOVAL
Remove the headrest guides while pushing the on both sides inward.
 
 
 
 
ASSEMBLY SERVICE POINT
 
 
>>A<< FRONT SEAT SIDE-AIRBAG MODULE INSTALLATION
1. Temporarily tighten side-airbag module mounting nuts.
2. First tighten the lower mounting nut to the specified torque, and then tighten the upper mounting nut to the specified torque.
Tightening torque: 6.0 ± 2.0 N·m (53 ± 17 in-lb)