Connect the scan tool (M.U.T.-IIISE) to the 16-pin data link connector as follows.| note | For details on how to use the scan tool (M.U.T.-IIISE), refer to the "scan tool (M.U.T.-IIISE) User's Manual." |
1. Start the scan tool (M.U.T.-IIISE) system.
2. Select "F.A.S.T./OSS/IMMO/Keyless" button from the "System Select" screen. Then, select the applicable option code item and push the OK button.- The display of "Special Function" screen changes, depending on the contents of the option. For vehicles with KOS, select "with F.A.S.T.".
3. Select "Comm. Test" on the "Special Function" screen.
4. Select the antenna to be tested on "Comm. Test" screen, and press the OK button with the keyless operation key placed within the communication operational area.
5. "Communication is normal." is displayed. Press the OK button to finish.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
)
)