[Previous][Next]
DISASSEMBLY AND REASSEMBLY
 
 
cautionWhile disassembling the keyless operation key, the sudden flow of static electricity can interfere with the electronic circuits in the keyless operation key and the electronic circuits might be damaged. Be sure to get rid of your body's static electricity before disassembling the keyless operation key.
Post-installation operation
Operation check of the keyless operation key
Disassembly steps
<<A>>1.Emergency key
<<B>>2.Upper cover
<<B>>3.Lower cover
<<B>>>>A<<4.Battery
 
 
DISASSEMBLY SERVICE POINTS
 
 
<<A>> EMERGENCY KEY REMOVAL
Move the lever on the lower cover and remove the emergency key from the keyless operation key.
 
 
 
<<B>> UPPER COVER/TRANSMITTER ASSEMBLY/BATTERY/LOWER COVER REMOVAL
cautionDo not allow water or dust to enter the inside of the transmitter assembly when it is open. Also, do not touch the precision electronic device.
Set a flat-tipped screwdriver wrapped with protective tape as shown in the figure, and pry off the keyless operation key.
 
 
 
 
REASSEMBLY SERVICE POINT
 
 
>>A<< BATTERY INSTALLATION
cautionDo not allow water or dust to enter the inside of the transmitter assembly when it is open. Also, do not touch the precision electronic device.
Install a battery with the positive side facing toward the lower cover.
Replacement battery: Coin-type lithium battery CR2032