42A-LIFTGATE HANDLE AND LATCH INSPECTION

[Previous]

[Next]

INSPECTION

LIFTGATE LOCK RELEASE HANDLE (LIFTGATE OPEN SWITCH) CHECK

Switch position	Terminal number	Normal value
Push (open)	1 - 2	Continuity exists (2 ohms or less)
Release	1 - 2	No continuity

Switch position	Terminal number	Normal value
Push (open)	1 - 2	Continuity exists (2 ohms or less)
Release	1 - 2	No continuity

LIFTGATE LOCK ACTUATOR CHECK

Lever position	Battery connection	Lever operation
At the "SET" position	Connect terminal 2 to negative battery terminal. Connect terminal 3 to positive battery terminal.	Lever moves from "SET" to "OPEN" position.

Lever position	Battery connection	Lever operation
At the "SET" position	Connect terminal 2 to negative battery terminal. Connect terminal 3 to positive battery terminal.	Lever moves from "SET" to "OPEN" position.

LIFTGATE LATCH SWITCH CHECK

Claw position	Terminal number	Normal value
Unlatch (ON)/ Half-latch (ON)	1 - 2	Continuity exists (2 ohms or less)
Full-latch (OFF)	1 - 2	No continuity

Claw position	Terminal number	Normal value
Unlatch (ON)/ Half-latch (ON)	1 - 2	Continuity exists (2 ohms or less)
Full-latch (OFF)	1 - 2	No continuity