DOOR OUTSIDE HANDLE ASSEMBLY PLAY CHECK
1.
Check that the door outside handle assembly play (stroke until the door latch unlocks) meets the standard value.
Standard value (B):
Front door: 0 - 5.0 mm (0 - 0.2 inch) [Target value: 2.3 mm (0.09 inch)]
Rear door: 0.1 - 5.1 mm (0 - 0.2 inch) [target value: 2.4 mm (0.09 inch)]
2.
Check the door outside handle assembly and door latch assembly. Replace them if the play is out of the standard value.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)