[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Pre-removal and post-installation operation
  • Liftgate Spoiler (Refer to GROUP 51, Liftgate Spoiler ).
  • Rear Wiper Blade and Arm Assembly Removal and Installation (Refer to GROUP 51, Rear Wiper and Washer ).
  • Liftgate Trim Removal and Installation (Refer to GROUP 52A, Liftgate Trim ).
Liftgate window glass Removal steps
Harness connector
<<A>>>>B<<1.Liftgate window glass
>>A<<2.Dual lock fastener
>>A<<3.Glass stopper
>>A<<4.Spacer
Liftgate extra window glass Removal steps
<<A>>>>B<<5.Liftgate extra window glass
>>A<<6.Dual lock fastener
>>A<<7.Glass stopper
>>A<<8.Clip
>>A<<9.Extra window lip upper
>>A<<10.Extra window lip lower
>>A<<11.Extra window lower molding
 
 
REMOVAL SERVICE POINT
 
 
<<A>> LIFTGATE WINDOW GLASS/LIFTGATE EXTRA WINDOW GLASS REMOVAL
Remove the liftgate window glass or liftgate window extra glass by the same procedures as for the windshield glass (Refer to ).
noteUse a piano wire to remove the liftgate window glass or liftgate extra window glass.
 
 
 
 
INSTALLATION SERVICE POINTS
 
 
>>A<< GLASS STOPPER/SPACER/CLIP/DUAL LOCK FASTENER INSTALLATION
1. Use the parts cleaner (MZ100387 or equivalent) to degrease the inside circumference of the liftgate window glass or liftgate extra window glass and liftgate flanges.
2.
Install the spacer, clip, glass stopper and dual lock fastener to the specified position on the liftgate window glass or liftgate extra window glass.
 

 
 
>>B<< LIFTGATE WINDOW GLASS/LIFTGATE EXTRA WINDOW GLASS INSTALLATION
1. Apply the primer and adhesive.
2. Install the liftgate window glass or by the same procedure as for the windshield glass (refer to ).