[Previous][Next]
DTC U1015 FCM/LDW/AHB Parity/Toggle Bit Error
 
 
cautionBefore replacing the ECU, ensure that the communication circuit is normal.
 
 
OPERATION
The ASC-ECU communicates with the FCM/LDW/AHB-ECU via CAN bus lines.
 
 
 
DTC SET CONDITIONS
The ASC-ECU will set the DTC when it receives an implausible signal from the FCM/LDW/AHB-ECU.
 
 
 
PROBABLE CAUSES
  • Wiring harness or connector failure of CAN bus line
  • Malfunction of FCM/LDW/AHB-ECU
  • Malfunction of ASC-ECU
 
 
 
 
DIAGNOSIS
1. Check scan tool (M.U.T.-IIISE) CAN bus diagnostics
2. Check scan tool (M.U.T.-IIISE) other system DTC <FCM/LDW/AHB-ECU>
3. Check whether the DTC is set again.