1. Remove the drain plug and gasket, to drain the transfer oil.
2. Install the drain plug and new gasket, and tighten to the specified torque.Tightening torque: 32 ± 2 N·m (24 ± 1 ft-lb)
3. Remove the filler plug and gasket, and fill the transfer oil up to the lower edge of the filler plug hole.- Transfer oil: Mitsubishi Motors Genuine Super Hypoid Gear Oil API GL-5 SAE80
- Filling amount: 0.47 dm3 (0.50 quarts)
4. Install the filler plug and new gasket, and tighten to the specified torque.Tightening torque: 32 ± 2 N·m (24 ± 1 ft-lb)
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)