[Previous][Next]
DATA LIST REFERENCE TABLE
caution
  • Road test always needs two people: one driver and one observer.
  • When shifting the selector lever to "D" position the brakes should be applied so that the vehicle does not move forward.
Item No.Check itemCheck conditionNormal condition
4Vehicle speedRoad test the vehicle.The speedometer and scan tool (M.U.T.-IIISE) display the same value.
57Cancel codeIgnition switch: "ON"The cancel code, which set when the cruise control system was cancelled at the last time, is set again.
74Stoplight switch (for stoplight circuit)Ignition switch: "ON"Brake pedal: DepressedON
Brake pedal: ReleasedOFF
75Cancel switchIgnition switch: "ON"CANCEL switch: PressedON
CANCEL switch: ReleasedOFF
81Cruise control operationCruise control: activeON
Cruise control: InactiveOFF
86Cruise control ON/OFF switchIgnition switch: "ON"Cruise control ON/OFF switch: PressedON
Cruise control ON/OFF switch: Pressed againOFF
88Neutral position switch (Cruise control)Ignition switch: "ON"Selector lever: "N" or "P" positionON
Selector lever: Other than "N" or "P" positionOFF
89Normally closed brake switchIgnition switch: "ON"Brake pedal: DepressedON
Brake pedal: ReleasedOFF
91Resume switchIgnition switch: "ON"RES + switch: PressedON
RES + switch: ReleasedOFF
92Set switchIgnition switch: "ON"SET - switch: PressedON
SET - switch: ReleasedOFF