[Previous] [Next]

REMOVAL AND INSTALLATION


warning
  • Before removing the ETACS-ECU and knee air bag module, refer to GROUP 52B, Service Precautions and Knee Air Bag Module .
  • When removing and installing the ETACS-ECU, do not let it bump against the knee air bag module.
caution When replacing the ETACS-ECU, use the ETACS-ECU to which the chassis number is written and the coding is implemented. Also, if diagnosis code No. B1761 "VIN not programmed" or No. B222C "Coding not completed" is set to the ETACS-ECU, replace with the ETACS-ECU to which the chassis number same as that of vehicle is written and the coding is implemented.
Pre-removal and Post-installation Operation
  • Side lower panel assembly (Refer to GROUP 52A, Instrument Lower Panel ).
  • Knee air bag module (Refer to GROUP 52B, Knee Air Bag Module ).





Removal Step


1.
ETACS-ECU