![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
1.Remove the headlight support panel cover (Refer to GROUP 51, Front Bumper Assembly and Radiator Grille  ). |
) |
2.Loosen the hood latch mounting bolts but do not remove them. Move the hood latch up/down and left/right to align the hood level and adjust the hood striker engagement. 3.After the adjustment, tighten the hood latch mounting bolts to 9.0 ± 1.0 N·m (80 ±9 in-lb). 4.Install the headlight support panel cover. (Refer to GROUP 51, Front Bumper Assembly and Radiator Grille .) |