CODING LIST

caution

With the ETACS functions being customized, if any of the ETACS-ECU variant coding and option coding items are changed, the customized contents are reset. In such case, the functions need to be recustomized.

Before troubleshooting, check that the coding data written into the engine control module, TC-SST-ECU and ETACS-ECU are normal. If they are not the same as the initial settings, various functions and systems will not work correctly.

VARIANT CODING

Required Special Tools:

MB991958: Scan Tool (M.U.T.-III Sub Assembly)

MB991824: Vehicle Communication Interface (V.C.I.)
MB991827: M.U.T.-III USB Cable
MB991910: M.U.T.-III Main Harness A (Vehicles with CAN communication system)

The coding data can be checked by operating scan tool MB991958.

note

For details on how to use the scan tool MB991958, refer to the "M.U.T.-III Owner’s manual".

caution

To prevent damage to scan tool MB991958, always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool MB991958.

1.Ensure that the ignition switch is at the "LOCK" (OFF) position.
2.Start up the personal computer.
3.Connect special tool MB991827 to special tool MB991824 and the personal computer.
4.Connect special tool MB991910 to special tool MB991824.
5.Connect special tool MB991910 to the data link connector.
6.Turn the power switch of special tool MB991824 to the "ON" position.

note

When special tool MB991824 is energized, special tool MB991824 indicator light will be illuminated in a green color.

7.Start the "M.U.T.-III system" on the personal computer.
8.Turn the ignition switch to the "ON" position.
9.Select "System select" from the start-up screen.
10.Select "From 2006 MY" under "Model Year". Check that "Vehicle Information" contents are correct.
11.On the system list screen, select "MPI/GDI/DIESEL" to check the engine control module data, "AT/CVT/A-MT/TC-SST" to check the TC-SST data, and "ETACS" to check the ETACS-ECU data.

note

If "Loading Option Setup" list is shown, click appropriate box.

12.Select "Coding."
13.Select "Coding information & copy."
14.If the displayed coding information is different from the corresponding initial setting in the list, replace the ECU with a correctly coded one. For replacement of the engine control module, refer to GROUP 13A, engine control module

<4B11 Non-turbo> or GROUP 13B, engine control module

<4B11 Turbo> or GROUP 13C, engine control module

<4B12>. For replacement of the TC-SST-ECU^*, refer to GROUP 22C, transaxle assembly

. For replacement of the ETACS-ECU, refer to GROUP 54A, ETACS

note

^*: TC-SST-ECU cannot be disassembled. Thus, replace the transaxle assembly.

ENGINE CONTROL MODULE CODING DATA LIST

Item name	Initial value
Final gear ratio	5MT/6MT <M/T>
	6.120 <CVT>
	4.062 <TC-SST>
Tire circumference	2015mm
IMMOBILIZER	Present
ABS	Present or Not present
A.S.C.	Present or Not present
S/W variation	Variation No.1

TC-SST-ECU CODING DATA LIST

Item name	Initial value
Vehicle line	LANCER
Destination	U.S.
Tire size	215/45R18
Cruise control	Present
A.S.C.	Present
Turbo charger	T/C (INCONEL-AL)

ETACS-ECU CODING DATA LIST

note

The items to be displayed may differ depending on the version of the ETACS-ECU.

Item name	Initial value
Vehicle line	LANCER
Model year	(Displays the model year)
SST oil cooling fan	Not present
Destination	U.S.
Transmission	5MT <M/T>
	CVT <CVT>
	TC-SST <TC-SST>
Engine type	2.0L D4 MPI VVT <2.0L Non-turbo Engine>
	2.0L D4 VVT T/C <2.0L Turbo Engine>
	2.4L D4 MPI VVT <2.4L Engine>
Engine power	Normal
Handle side	LHD
Chassis Type for A.S.C.	Type 2 <2.0L Non-turbo Engine>
	Type 6 <2.0L Turbo Engine>
	Type 4 <2.4L Engine>
Deadlock Button Operation	2 or Not present
Final drive	Front Drive <2.0L Non-turbo Engine, 2.4L Engine>
Final drive	AWD FF Base <2.0L Turbo Engine>
Transfer	2WD <2.0L Non-turbo Engine, 2.4L Engine>
Transfer	ACD <2.0L Turbo Engine>
IG off delay control	Disabled <2.0L Non-turbo Engine, 2.4L Engine>
IG off delay control	Enable <2.0L Turbo Engine>
Tire size	-
Tire circumference	2015mm
Fuel tank	Not used
DRL^*1 type	Dimming DRL w/ P <halogen type>
DRL^*1 type	IndependentDRL/P <discharge type>
Smart entry system	Not present or Type A or Type C
TPMS^*1	Present
Keyless entry^*2	Not present or Present
Airbag Auto Hazard	Not Present
Immobilizer	Type A or Type B
Cruise control	Not present or Present
Corner sensor	Not present
Headlight auto leveling device	Not present
Oil level warning	Not present
Water separate warning	Not present
Speed meter scale	Not used
Idle neutral control	Not used
ENG-CVT unit control	Not used
INVECS control	Not used
Lock-up slip control	Not used
Side air bag	Present
ACC power auto cut	Default enabled
Number of speaker^*2	Premium or 6 speakers or 4 speakers
Seat material^*2	Fabric or Leather
Auto light control	No/Cng Ng or Hi RLS/chg Ng
Front differential	Open <2.0L Non-turbo Engine, 2.4L Engine>
Front differential	Helical <2.0L Turbo Engine>
Rear differential	Undefined <2.0L Non-turbo Engine, 2.4L Engine>
Rear differential	AYC <2.0L Turbo Engine>
Power window type	Type P3 or Type P4
Sunroof type	Not present or Type S4
WCM	Present
OCM	Present
ORC	Present
A/C	Present
AUDIO^*2	Not present or Present
AND^*2	Not present or Present
VES	Not used
DISP	Not used
NAVI	Not used
CAMERA	Not present
TUNER	Not used
Electric Slide door (Left)	Not present
Electric Slide door (Right)	Not present
ETG	Not present
MSMD	Not used
HFM^*2	Not present or Present
Comfort washer customize	Disabled
Headlight Leveling system type	Type1/No present
ABS	Not present or Present
A.S.C.	Not present or Present
SAS	Not present or Present
AWD	Not present
TCM	Not present <M/T>
TCM	Present <CVT, TC-SST>
ACTV_STB	Not used
Pre-Crush	Not used
EPS	Not present
ACDAYC	Not present <2.0L Non-turbo Engine, 2.4L Engine>
ACDAYC	Present <2.0L Turbo Engine>
Indirect light	Not present
Power window Dr	Not present or Present
Power window As	Not present
Power window RR	Not present
Power window RL	Not present
Power window BK	Not used
Sunroof	Not present or Present
RLS	Not present or Present
Washer function improvement	Disabled
IG key illumination	W/ getting off
Turn signal bulb	21W+21W+5W
Rear wiper	Disabled
Fold mirror	Disabled
Headlight	4 beams
Comfort Hazard	Disabled
Head light washer	Disabled
Front fog light mode	A spec.
Front fog light^*2	Not present or Present
Rear fog light^*2	Not present/ChgOK
Room light delay timer/door and H/L	Long
Room light by H/L	Full
Gate/Trunk light	Mode-1 (trunk)
Headlight auto cut mode	C-spec
Headlight auto cut	Enable
Door lock system	Not present or A-spec (NAS)
Auto door lock/unlock	Disabled
key reminder unlock	Disabled or B-spec/Dr and As
Horn type^*2	Dual horn
Gate/trunk opener mode	Not present or Present (Type 1)
Cooling fan	Relay control
Security alarm mode	Not present or C-spec
Security alarm function	NotPresent/ChgNg or Present/Chg Ng
Pre-alarm	Not present
Multi mode RKE	Disabled
Gate/Trunk	Trunk type
Manner switch	Not present/ChgNg
Remote engine starter	Not present/ChgNg
Panic Alarm	Disabled or Enable
Roomlight improvement	Disabled or Enable
Front wiper	Speed Sensitive or Rain Sensitive
Comfort flasher type	Present/Chg OK
Dome light Center Switch	Not present
Wiper washer check bulb^*2	Present
AUDIO/S.RADIO type	Other
H/L leveling type	Not present
AFS/ACL^*1 type	Not present
ESS	Not present
Compressor type^*2	No compressor or Scroll 90cc
Temperature type	Celsius or Fahrenheit
Rear view camera	Not present
Nose view camera	Not present
Side view camera	Not present
Average speed	Available
Vehicle language status	English
Fuel amount	Not used
Fuel consumption scale	L/100km or MPG (US)
Speed gauge tolerance	U.S.
Coolant temp gauge threshold	Normal
Frost warning threshold	U.S.
Distance to empty	Available
Average fuel consumption	Available
Instant fuel consumption	Available
Time traveled	Not available
Distance traveled	Not available
Fuel used	Not available
Trip autoreset IG OFF	Available
Variable Speed Alarm	Not available
Rest reminder	Available
Instant speed	Not available
Seat belt reminder type or Seat belt reminder control type	Type 1 or AABT
Seat belt reminder flashing	Available
Seat belt reminder indicator	D & P independ
Reverse alarm	Not available
Key reminder	Available
Lighting monitor	Available
GCC speed alarm	Not available
Condition buzzer	Not available
Rent-a-car mode IG-OFF always	Available
Rent-a-car mode IG-OFF door open	Available
Service reminder schedule table	NAS 10 <2.0L Non-turbo Engine, 2.4L Engine>
Service reminder schedule table	NAS 20 <2.0L Turbo Engine>
ACD control display	Not used
TPMS information	32 psi <2.0L Non-turbo Engine, 2.4L Engine>
TPMS information	35 psi <2.0L Turbo Engine>
Horn chirp by keyless	Present/ChgOK
Rear S/R unlock output	Not present
Trailer turn detection	present
Shift Lever	Not present <2.0L Non-turbo Engine, 2.4L Engine>
Shift Lever	present <2.0L Turbo Engine>
AFS/ACL	Not present
Satellite Radio^*2	Not present or Present
Fuel tank type	Not used
F.A.S.T. auto lock customize	Not used
DRL function^*2	Present/Chg OK
FACU	Not present
S-AWC control display	Not available
Diesel particulate filter	Not present
Language mode	Available
WSS	Not present
Door Unlock Mode Customize	Disabled
RLS overwipe type	Type 1
RLS WS type	Type 2 (Green)

note

^*1: TPMS is an abbreviation of Tire Pressure Monitoring System, DRL of Daytime Running Light and AFS of Adaptive Front lighting System. However, the systems are not used for this vehicle.
^*2: The setting can be changed by the option coding. Refer to .

OPTION CODING

Required Special Tools:

MB991958: Scan Tool (M.U.T.-III Sub Assembly)

MB991824: Vehicles Communication Interface (V.C.I.)
MB991827: M.U.T.-III USB Cable
MB991910: M.U.T.-III Main Harness A (Vehicles with CAN communication system)

caution

If there is any item indicated by the option coding after equipment change, set ETACS-ECU so that the option coding data corresponds with the equipment content. Functions and systems do not work normally if the setting does not correspond with the equipment.
With the ETACS functions being customized, if any of the ETACS-ECU variant coding and option coding items are changed, the customized contents are reset. In such case, the functions need to be recustomized.

The ETACS-ECU option coding data can be checked or changed by operating scan tool MB991958.

How to check option coding data

Connect the scan tool MB991958. Refer to .
Turn the ignition switch to the "ON" position.
Select "System select" from the start-up screen.
Select "From 2006 MY" under "Model Year". Check that "Vehicle Information" contents are correct.
Select "ETACS" from "System List", and then press "OK" button.

note If "Loading Option Setup" list is shown, click appropriate box.
Select "Coding."
Select "Option Coding Information."
Check the displayed option coding information.

How to change option coding data

Connect the scan tool MB991958. Refer to .
Turn the ignition switch to the "ON" position.
Select "System select" from the start-up screen.
Select "From 2006 MY" under "Model Year". Check that "Vehicle Information" contents are correct.
Select "ETACS" from "System List", and then press "OK" button.

note If "Loading Option Setup" list is shown, click appropriate box.
Select "Coding."
Select "Option Coding."
Change to correct option coding data.

LIST

Item name

Number of speaker

Seat material

AUDIO (CAN)

AND

HFM (hands free-ECU)

Front fog light

Rear fog light

Horn type

Wiper washer check bulb

Compressor type

Satellite Radio

DRL function

Keyless