54A-RADIO AND CD PLAYER REMOVAL AND INSTALLATION

REMOVAL AND INSTALLATION

note	When the radio and CD player is replaced, always turn the ignition switch to the "ON" position once and then carry out the operation check.

Pre-removal and post-installation Operation

Instrument center panel assembly removal and installation (Refer to GROUP 52A - Instrument Center Panel

)

		Removal steps
>>A<<	1.	Radio and CD player assembly
	2.	Bracket
	3.	Radio and CD player harness (for rear view camera)
	4.	Radio and CD player

INSTALLATION SERVICE POINT

>>A<< RADIO AND CD PLAYER ASSEMBLY INSTALLATION

The connectors, antenna and cables connected to the radio and CD player are shown in the figure.