[Previous][Next]
REMOVAL AND INSTALLATION
noteWhen the smartphone link display audio is replaced, always turn the ignition switch to the "ON" position once and then carry out the operation check.
Pre-removal and post-installation Operation
Instrument center panel assembly removal and installation (Refer to GROUP 52A - Instrument Center Panel)
Removal steps
>>A<<1.Smartphone link display audio
2.GPS antenna
3.Smartphone link display audio harness

 
 
INSTALLATION SERVICE POINT
 
 
>>A<< SMARTPHONE LINK DISPLAY AUDIO INSTALLATION
The connectors, antenna and cables connected to the smartphone link display audio display are shown in the figure.