[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Removal steps
<<A>>>>A<<1.Floor console panel
•USB adapter connector connection
•Heated seat switch connector connection <Vehicles with heated seat>
2.Floor console tray
•Key slot <Vehicles with KOS> (Refer to GROUP 42B - Key Slot )
3.Plug <Vehicles without heated seat>
4.Heated seat switch <Vehicles with heated seat>
5.USB adapter
6.Gearshift lever knob <M/T>
7.M/T shift boot assembly <M/T (Vehicles with garnish)>
8.M/T shift boot <M/T (Vehicles with garnish)>
9.Garnish <M/T (Vehicles with garnish)>
10.Floor console assembly
11.M/T shift boot assembly <M/T (Vehicles without garnish)>
 
 
REMOVAL SERVICE POINT
 
 
<<A>> FLOOR CONSOLE PANEL REMOVAL
1. Depress the floor console assembly to the left as shown.
2. Grasp the bottom edge of the floor console panel to pull it up.
 
 
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< FLOOR CONSOLE PANEL INSTALLATION
1. Hook the tab of the floor console panel onto the floor console assembly as shown.
2. Install the floor console panel.