Cannot communicate with KOS&OSS-ECU using the scan tool | 1 |  |
The keyless operation key cannot be registered using the scan tool | 2 |  |
Abnormality in KOS&OSS-ECU power supply and ground circuits | 3 |  |
Keyless operation warning display does not disappear | 4 |  |
No door will be locked or unlocked by operating a lock/unlock switch on any door | 5 |  |
Driver's door lock/unlock switch does not work | 6 |  |
Trunk lid opener switch does not work | 7 |  |
Keyless entry function does not work | 8 |  |
KOS timer lock function does not work | 9 |  |
Keyless entry hazard answer back function or the dome light answer back function does not work normally | 10 |  |
Outer tone alarm does not sound | 11 |  |
Power door locks with selective unlocking does not work | 12 |  |
Vehicle power does not turn "ON" (not possible with both of power supply mode "ACC" and "ON") | 13 |  |
Engine does not start (cranking is not performed) | 14 |  |
Vehicle power cannot be turned "OFF" when the shift position is in "P" (Power supply mode "ON" to "ACC" is possible) | 15 |  |
ACC power auto cut function does not work normally | 16 |  |
Vehicle power cannot be turned "OFF" | 17 |  |
The TPMS warning light stays on | - | Refer to GROUP 31, Trouble Symptom Chart . |
The TPMS warning light flash for about 1 minute and then remain illuminated | - |