[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Removal steps
1.Self-locking nut
2.Exhaust tail pipe
3.Seal ring
4.Main muffler
5.Seal ring
>>A<<6.Damper hanger
7.Hanger
8.Heat protector panel dash upper
Gearshift cable and select cable assembly (Refer to GROUP 22A, Transmission Control ) <M/T>.
Transmission control cable (Refer to GROUP 23A, Transmission Control ) <CVT>.
9.Heat protector panel front floor front
10.Heat protector panel front floor rear
11.Heat protector panel rear
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< DAMPER HANGER INSTALLATION
Install the damper hanger in the direction shown in the figure.