SEAT BELT WITH PRE-TENSIONER CHECK
| warning | - If any component damage is found during the following inspection, replace the seat belt with pre-tensioner with a new one. Dispose of the old one according to the specified procedure (Refer to
 ). - Never attempt to measure the circuit resistance of the seat belt pre-tensioner even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental seat belt pre-tensioner operation will result in serious personal injury.
|
If any malfunction is found in the following inspections, replace the seat belt with pre-tensioner with a new one.
- Check the seat belt pre-tensioner for dents, cracks or deformation.
- Check the harness and connector for damage and the terminal for deformation.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)