[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Removal steps
•.Glove box (Refer to )
<<A>>1.Instrument center panel
2.Radio and CD player (Refer to GROUP 54A, Radio with CD Player )
3.Bracket (LH/RH)
4.Radio plug <Vehicles for audio less>
•.Floor console assembly (Refer to )
•.Outside/Inside air selection damper control cable connection (Refer to GROUP 55A, Heater Control Unit )
•Mode selection damper control cable connection (Refer to GROUP 55A, Heater Control Unit )
5.Heater controller assembly <Except vehicles with automatic A/C> (Refer to GROUP 55A, Heater Control Unit ) or Automatic A/C controller assembly <Vehicles with automatic A/C> (Refer to GROUP 55B, Automatic A/C Controller Assembly )
 
 
REMOVAL SERVICE POINT
 
 
<<A>> INSTRUMENT CENTER PANEL REMOVAL
1. Remove the glove box.
2. Insert your hand through the instrument panel opening, and push up the clip shown in the illustration from the back of instrument center panel.
3. Remove the instrument center panel starting from the clearance made by pushing the clip up.