REMOVAL AND INSTALLATION
Pre-removal and post-installation operation
Rear combination light assembly (Refer to GROUP 54A, Rear Combination Light
)
Removal steps
•
Rear wheelhouse splash shield (Refer to GROUP 42A, Splash Shield
)
1.
Rear bumper face
>>A<<
2
Seal pad
3.
Rear bumper side bracket
4.
Rear end crossmember assembly
INSTALLATION SERVICE POINT
>>A<< SEAL PAD INSTALLATION
1.
Use the parts cleaner (3M™ AAD Part number 8906 or equivalent) to clean the seal pad installation surfaces on the rear bumper.
2.
Align the end of the seal pad with A portion as shown.
)![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)