42B-DATA LIST REFERENCE TABLE

DATA LIST REFERENCE TABLE

Vehicles with Keyless Operation System(KOS) and One-touch Start System(OSS)

Item No.	Check item	Check condition	Normal condition
1^*1	Received F.A.S.T.-key data(ID)	-	Memorized keyless operation key ID
2	Received F.A.S.T.-key (button)	-	Switch display of the keyless operation key
3	Driver’s door lock/unlock SW	Driver’s door lock/unlock switch: "ON"	ON
3	Driver’s door lock/unlock SW	Driver’s door lock/unlock switch: "OFF"	OFF
5^*1	Passenger’s door lock/unlock SW	-	ON
5^*1	Passenger’s door lock/unlock SW	-	OFF
7	Gate (LOCK/UNLOCK) / Trunk OPEN SW	Trunk lid opener switch: ON	ON
7	Gate (LOCK/UNLOCK) / Trunk OPEN SW	Trunk lid opener switch: OFF	OFF
14	Memorized F.A.S.T.-keys	-	Number of the keyless operation keys memorized
15	Memorized emergency F.A.S.T.-keys	-	Number of the spare keys memorized
20	Engine switch(1)	When the engine switch is pressed	ON
20	Engine switch(1)	When the engine switch is not pressed	OFF
21	Engine switch(2)	When the engine switch is pressed	ON
21	Engine switch(2)	When the engine switch is not pressed	OFF
22^*2	Stoplight switch	When the brake pedal is depressed	ON
22^*2	Stoplight switch	When the brake pedal is released	OFF
23^*3	Clutch monitoring switch	When the clutch pedal is depressed	ON
23^*3	Clutch monitoring switch	When the clutch pedal is released	OFF
24	P range detect SW	Shift the selector lever to the position other than the P position.	Outside park
24	P range detect SW	Shift the selector lever to the P position.	Park
25	IG1 output (monitor)	Power supply mode is turned "ON" or the engine is being started by the pressing of engine switch.	ON
25	IG1 output (monitor)	Other than above	OFF
26	IG2 output (monitor)	Power supply mode is turned "ON".	ON
26	IG2 output (monitor)	Other than above	OFF
27	OSS power supply status	Power supply mode is abnormal.	Default or SNA
		Power supply mode is OFF.	IG OFF
		Power supply mode is ACC.	IG ACC
		Power supply mode is ON.	IG ON
		Ignition switch: "ON"	IG START
		Ignition switch: "ON"	IG RUN(judging)
28	+B1 Power supply voltage (AD)	Always	System voltage
29	+B2 Power supply voltage (AD)	Always	System voltage

note	^1 shows that it is displayed but not used. ^2: Indicates that the output is performed with CVT vehicles only. ^*3: Indicates that the output is performed with M/T vehicles only. Refer to data list reference table of Tire Pressure Monitoring System(TPMS) (GROUP 31, Data List Reference Table ).