[Previous][Next]
CUSTOMIZATION FUNCTION
Using the ETACS system of scan tool (M.U.T.-III), the following functions can be programmed. The programmed information is held even when the battery is disconnected.
Adjustment item (scan tool display)Adjustment itemAdjusting content (scan tool display)Adjusting content
Door unlock modeAdjustment of power door locks with selective unlockingAll Doors UnlockThe first operation of keyless entry system or unlock operation by KOS unlocks all doors.
Dr Door UnlockThe first operation of keyless entry system or unlock operation by KOS unlocks the driver's door only, and the second unlock operation within 2 seconds after that unlocks all doors. (initial condition)
Door unlock (Shift "P" position)Adjustment of the auto door unlock (P position) function <CVT>DisableNo function (Initial condition)
EnableAlways with function